Dazzle Rapid action filter cleanse 800ml i23.1

Pourquoi:

• Effectively cleans all types of filter medias including sand, glass, cartridges, DE elements
• Disinfects the media with accelerated Hydrogen Peroxide (H2O2)
• Powerful, biodegradable surfactants emulsify, release and removes oils, greases, grime and other contaminants that aren’t effectively removed with normal backwashing or rinsing
• Dissolves rust, scale deposits and other causes of media ‘hardening’ that reduces filter efficiency
• Whitens cartridges to like new appearance
• Completely safe to backwash onto the lawn or garden or dispose to the drain or storm sewer
• Works fast, works effectively to restore filtration to consistent, high performance level

Quand:

• Recommended a minimum of once per year, usually at pool closing so the filter media sits for the winter in a clean state
• A mid-summer cleaning is also recommended, especially for pools that;
  • Have higher than average bather loads
  • Experience high pollen and/or other heavy organic loading
• After any problem that has put strain on the filtration system, including;
  • Eau trouble
  • Algae/Biofilm
  • Chlorine Demand
  • Discoloured water from metals and/or staining
  • Scale formations

Combien:

• Sand filters: use the entire bottle (800 mls) with each cleaning for average sized filter
• Cartridge & DE: use the entire bottle (800 mls). Mix in a solution of hot water and soak for 1 hour, if possible, for best results. 

Comment: 

• Always wear rubber gloves when handling filter media
• For Sand/Glass Media Filters:
  • Pour the product into the pump and secure the lid
  • With the dial valve on ‘Rinse’ or ‘Backwash,’ turn the pump on until the product is pumped into the filter tank ( 3 – 5 seconds)
  • Allow to soak for minimum 15 minutes. 1 hour is ideal.
  • Backwash thoroughly.
• For Cartridge & DE filters:
  • Remove cartridge(s) and DE elements from filter housing. 
  • Éliminez soigneusement autant de débris que possible avec un tuyau d’arrosage.
  • Mélangez Dazzle Rapid Action Filter Cleanse et de l'eau chaude (si possible) dans un seau en plastique, une cuve à lessive ou un récipient de nettoyage de filtre.
  • Submerse and soak for 15 minutes to 1 hour. 
  • Rinse well with water.
  • Allow cartridge/elements to dry – this will tighten the fibres and improve performance. 
  • Reassemble and return to use.